Staff Answer
Jun 01, 2026 - 06:22 AM
Yes, this fixture uses 0-10V dimming, so you will need a 0-10V LED dimmer rather than a standard residential wall dimmer (TRIAC/forward-phase dimmer).
Most commercial 0-10V dimmers will work with this fixture. When selecting a dimmer, please verify that the dimmer's current rating is sufficient for the number of fixtures being controlled.
For this 300W fixture:
- Input current is approximately 2.78A at 120V
- Input current is approximately 1.20A at 277V
If you are controlling multiple fixtures on the same circuit, be sure to add up the total load and confirm it is within the dimmer's rated capacity.
The fixture includes dedicated 0-10V dimming wires (typically purple and pink/gray) that connect to the 0-10V dimmer control circuit.
